Search

This section doesn’t currently include any content. Add content to this section using the sidebar.

WSE Pro Wake Shaper 2 145

FIND PRODUCT IN STORE

BOOST YOUR BOATS SURFING WAVE

The LF Wakesurf Edge Pro Wake Shaper 2 145 will make big wakes BIGGER! The Pro Shaper 2 145 requires a flat surface measuring 5" tall by 12" long clear of hull steps greater than 3/8". WSE suction cups will accommodate hull curvature.

Adjustable design lets you decide! Shift the Wakesurf Edge location on the fly to create deeper pockets or a longer wake face with more push.

+Features
  • Large Water Displacement Wing for Maximum Wave Height! (Face: 9" x 16" = 144sq")
  • Patented Concave Water Channeling Wing
  • Super Strong Suction Cup Attachment! Easy to Adjust on the Fly, No Ugly Velcro or Safety Tethers Required
  • Made with Rust-free Materials and FLOATS!
  • Level Load Boat to Keep Nose Down for the Captain's Visibility and a Long Wake
  • Do NOT tether shaper to Boat

WHERE TO ATTACH

PLACEMENT OF YOUR WAKESURF EDGE

Use the diagram for a good starting point to attach your Wakesurf Edge. It’s important to note that when your boat is still in the water it sits at a different angle than when your boat is pulling at wake surf speed. Attach your Wakesurf Edge at a slight upward angle to reflect the angle that your boat will travel in during the ride. That will ensure that the face of the Wakesurf Edge is causing optimal water flow obstruction and forming the best possible wave shape. A good rule of thumb on how deep to attach the Wakesurf Edge is to attach it so that 2 or 3 inches of the Wakesurf Edge is sticking out of the water. Remember that the back of the boat sinks down upon acceleratation.

FORWARD ON THE BOAT

Placing the Wakesurf Edge more forward up the boat will cause the wake to be mellower, longer, and have more push.

BACKWARD ON THE BOAT

Placing the Wakesurf Edge all the way back on the boat will cause the wake to be steeper, shorter, and have a deeper pocket.

HOW TO ATTACH

CLEAN SUCTION

cup on the Wakesurf Edge and the contact area on the boat

ATTACH THE

Wakesurf Edge to the opposite side of the rider, at or below water line near the stern of your boat

PRESS THE HANDLES

firmly against boat and flip up the the suction engagement levers

GIVE IT A SHAKE

to ensure it is suctioned firmly to your boat. If not, try again

GO SURF!

Wakesurf Edge is not meant for speeds greater than 13mph

TO DETACH

flip down engagement handles, and press firmly just above the logo

WITHOUT WAKESURF EDGE

Without Wakesurf Edge

WITH WAKESURF EDGE

With Wakesurf Edge

FIND A DEALER

Locator loading...